What Do I Do With Wet Camera Equipment?

If your camera equipment is wet, you probably wonder what to do with it. The good news is that there are several ways that you can dry out your gear and get back to taking pictures.

What Do I Do With Wet Camera Equipment?

If you’re in a hurry, try to shake as much water off the equipment as possible and place it in a dry, airtight container like a plastic bag or Tupperware.

If time permits, remove the battery and memory card and try to dry them off with a towel or tissue paper gently. 

Let’s go over different practical methods for getting moisture out of cameras.

Ways To Dry Out A Wet Camera

The Rice Method

One of the most popular ways to dry out a wet camera is to use the rice method. Place the camera and any other affected equipment in a container or bag with uncooked white rice. 

The rice will absorb the moisture from within the device. Make sure to leave the rice in for at least 24 hours before removing the camera.

The Silica Gel Method

Another way to dry out a wet camera is by using silica gel packets. You can find silica gel in many electronics stores or online. 

Place the camera and any other affected equipment in a container or bag with the silica gel packets. The packets will absorb the moisture from within the device. 

Make sure to leave the packets in for at least 24 hours before removing the camera.

The Hairdryer Method

If you have a hairdryer, this can be another way to try and dry out your camera. Turn the hairdryer on the lowest setting and hold it about 18 inches away from the camera. 

Blow air onto all of the wet surfaces for about five minutes. Be careful not to touch any electrical components or blow the dust off of them.

Sending For Repairs

Another option worth considering is sending your camera in for repairs. A professional can open the device and clean it thoroughly, which will remove any moisture from within. 

They can also test all electrical components and make sure that they aren’t damaged before returning the camera to you.

What to Do After Drying Out a Wet Camera

After you have successfully dried out your camera, there are a few things that you should do to prevent any further damage. 

1. First, make sure to test the device by turning it on and taking some pictures. 
2. If everything seems to be working properly, reformat the memory card and reload all of your photos and videos. 
3. Finally, store the camera in a dry place and keep it away from any potential sources of moisture.

What Not To Do With A Wet Camera

It would help if you never tried doing some things with a wet camera.

Avoid using a microwave to dry out the device, as this can cause damage that your warranty will not cover. 

You should also avoid applying heat from sources such as hot air or direct sunlight to prevent any problems with overheating and the expansion of components within the device.

How to Protect Your Camera From Getting Wet

To protect your camera from getting wet, you can take a few simple precautions. 

1. First, try to keep the camera in a dry place when not in use. 
2. If you are going to be taking pictures or videos outdoors, make sure to use a rain cover or lens hood to keep the equipment shielded from the elements. 
3. Finally, make sure to use a high-quality camera bag or case when traveling with your equipment. 

If you follow these steps and take the necessary precautions, there is no reason why your camera should ever get wet again.

Frequently Asked Questions

Final Thoughts

By following all of these steps carefully, you should be able to successfully dry out your camera without too many problems or additional expenses.

While some may work better than others, it is essential not to rush the process to avoid causing further damage.